The M10 is a
far more useful tool than a
carpenter’s level or a line
laser – its rotating beam
provides a perfectly level
reference line 360° around the
entire room. There’s no need to
buy additional accessories –
everything you need comes with
the laser! There’s a built-in
adjustable wall mount, a handy
remote control, and the ability
to slope the laser up to 90° to
lay out stairways and other
inclined planes. The M10 can be
used with either a standard
5/8-11 or camera tripod.
The M10 laser can be used in both
horizontal and vertical modes, with a
split beam for 90° angles. It’s a snap
to use – put the laser on the floor or
tripod, level the two bubbles, and go!
Choice of rotation speeds and scanning
lengths gives you the best options for
varying light conditions and job sites.
The scanning mode’s oscillating beam
intensifies the laser line, making it
easier to see at a distance.
Remote ControlTL15
Use the remote control
to adjust the rotation speed or scan
length and move the scan beam to the
left or right.
The M10 laser is delivered in a
sturdy carrying case with remote
control, magnetic target,
laser-enhancing glasses, and batteries.
Technical
Specifications
Product name
M10
Accuracy*
Fine: ±1cm @ 30m
(3/16" @ 50ft)
Laser Diode
Visible 635 nm;
<2mW Class IIIR
Rotation Speed
0, 150, 400, 600
rpm
Range*
30 m (100 ft.)
Battery life
30
hrs; 3 AA
alkaline
Tripod Mounts
Standard 5/8-11
or camera
*Varies with
laser used.
Actual accuracy
depends on beam
diameter and
distance to the
laser
